Visi Arena Master

Important Safety Instructions

CAUTION! OPENING THE DEVICE MIGHT RESULT IN ELECTRICAL SHOCK

Visually check the product for any signs of damage, component failure and/or missing parts.

Do not distract others while they
are installing the product.

Any changes or modifications to the devices hardware or software will void the warranty of the device and may cause the device not to work properly.

The trampoline and its surroundings must always comply with local standards for trampolines.  

If the instructions contradict the local regulations please disregard them.

Keep the device away from any contact with water. Warranty void after water damage.

For indoor use only.

Keep the device away from fire. Warranty void after fire damage.

Installation should be performed by
authorized personnel.

Be sure to take all anti-static
precautions.

Optimum operating temperature
is from 5°C to 30°C. Avoid extreme
fluctuations of temperature.

Wear appropriate clothing: Do not
wear loose clothing or jewellery.

These instructions apply to the
device itself. Please read the manual
before operation.

Long hair should be tied back.
Tidy back any loose cables that could become a tripping hazard.
Immediately inform Visior games
for maintenance advice if you have
concerns.		 Always use designated buttons on the designated system. and/or missing parts.

 

What’s in the box?

Full setup

First time setup

A typical installation should take 2 people around 60 minutes.

Ensure there is nobody on the trampoline when installing the device. Provide an internet connection. All of the Visiorgames products need to connect to the internet. If you own more than one device, provide internet access to the device in the center of the park and connect the devices via router or hub provided by us. 
Provide 110V or 230V for the device. Connect the ethernet cable to the Visior Computing Mini device into the ethernet port.

 

 

Installation checklist

CHECK 1 Pre-power up checkups

  • Mount the screen onto construction designed for the game
  • Make sure that all cables are connected:
    • HDMI cable from the computing device to screen
    • Ethernet cable with internet connection to ethernet socket
    • screen power cable to electricity
    • power adapter from Computing Mini to electricity
  • All fixings are tight and secure.
  • No signs of damage, component failure and/or missing parts.
  • No trapped and/or pinched cables.
  • No loose cables that could become a tripping hazard
  • Make sure there is no strain on the cables and the connectors.
  • All electrical components are away from contact with water and heat sources.

CHECK 2 Power up

  • Monitor and computing device must power on by itself when connected to power.
  • It usually takes around 1 minute for the system to boot up. You will be presented with the main screen graphics when done.

CHECK 3 Ready for use

  • Play area is clear of any obstructions.

 

Maintenance

  • Use a microfibre cloth to clean any dust that may be on the screen. 

 

Powering on for the first time

  Make sure that all cables are connected to
the aggregator boxes and the computer and
connectors tightened.		   Monitor must power on by itself when
connected to power.
 

Make sure that the buttons are on the correct

side of the cube relative to the monitor.

   It usually takes around 1min for the system
to boot up. When ready you will hire the GO
sound.
  When you power the system on the buttons
go over the programmed sequence and light
up RGB for a brief moment when the power is
provided by the computer.		   At this time the game is set for the first test.
  After the first sequence the buttons go dim and
are awaiting the game to start.		   Press start on the monitor and check that the
buttons are in the right positions by playing
one game.
 

In play safety guidelines

Before beginning any exercise program, it is recommended that you consult with your doctor.
Children under the age of 8 must always be supervised by an adult when using the equipment.
Visually check the equipment before using it, for any signs of damage, component failure or loose cables that could become a tripping hazard.
Wear appropriate clothing. Anti slip socks must be worn while using the equipment.
Remove all items from your pockets prior to participation.
Practice being in control of your bounce before using the equipment. Be aware of how to bend
your knees to control or stop your bounce. Always stay in control. Uncontrolled jumps or falls are
likely to result in injuries to yourself and others.
Don’t drink or eat while playing the game.

System operation

The game system is designed to start working immediately after being turned on and can be turned off anytime. Please take care to have at least a minute between turn on/off/on state changes.

Turn on procedure

Apply power to the main power line. This depends on your installation type, it can be a fuse box, or a main power switch.

Turn off procedure

Remove the unit from power, via a switch or a fuse box / main power.

Game objective

Troubleshooting

The system doesn’t power on:

  • Check the power connection to the Computing Mini.
  • Check the display power connection.

The highscore screen doesn’t appear:

  • Check the display power cable.

  • Check if the system is turned on.

  • Check the HDMI connection from the PC to the display.

  • If everything seems in order but no picture is displayed please contact us at: support@visiorgames.com.