Important Safety Instructions

CAUTION! OPENING THE DEVICE MIGHT RESULT IN ELECTRICAL SHOCK

	Visually check the product for any signs of damage, component failure and/or missing parts.		Do not distract others while they are installing the product.
	Any changes or modifications to the devices hardware or software will void the warranty of the device and may cause the device not to work properly.		The trampoline and its surroundings must always comply with local standards for trampolines.   If the instructions contradict the local regulations please disregard them.
	Keep the device away from any contact with water. Warranty void after water damage.		For indoor use only.
	Keep the device away from fire. Warranty void after fire damage.		Installation should be performed by authorized personnel.
	Be sure to take all anti-static precautions.		Optimum operating temperature is from 5°C to 30°C. Avoid extreme fluctuations of temperature.
	Wear appropriate clothing: Do not wear loose clothing or jewellery.		These instructions apply to the device itself. Please read the manual before operation.
	Long hair should be tied back.		Tidy back any loose cables that could become a tripping hazard.
	Immediately inform Visior games for maintenance advice if you have concerns.		Always use designated buttons on the designated system. and/or missing parts.

First time setup

A typical installation should take 2 people around 60 minutes.

	Ensure there is nobody on the trampoline when installing the device.		Provide an internet connection. All of the Visiorgames products need to connect to the internet. If you own more than one device, provide internet access to the device in the center of the park and connect the devices via router or hub provided by us.
	Provide 110V or 230V for the device.		Connect the ethernet cable to the Visior Computing Mini device into the ethernet port.

Installation checklist

CHECK 1 Pre-power up checkups

• Mount the screen onto construction designed for the game
• Make sure that all cables are connected:
  • HDMI cable from the computing device to screen
  • Ethernet cable with internet connection to ethernet socket
  • screen power cable to electricity
  • power adapter from Computing Mini to electricity
• All fixings are tight and secure.
• No signs of damage, component failure and/or missing parts.
• No trapped and/or pinched cables.
• No loose cables that could become a tripping hazard
• Make sure there is no strain on the cables and the connectors.
• All electrical components are away from contact with water and heat sources.

CHECK 2 Power up

• It usually takes around 1 minute for the system to boot up. You will be presented with the main screen graphics when done.

CHECK 3 Ready for use

• Play area is clear of any obstructions.

Powering on for the first time

In play safety guidelines

	Before beginning any exercise program, it is recommended that you consult with your doctor.
	Children under the age of 8 must always be supervised by an adult when using the equipment.
	Visually check the equipment before using it, for any signs of damage, component failure or loose cables that could become a tripping hazard.
	Wear appropriate clothing. Anti slip socks must be worn while using the equipment.
	Remove all items from your pockets prior to participation.
	Practice being in control of your bounce before using the equipment. Be aware of how to bend your knees to control or stop your bounce. Always stay in control. Uncontrolled jumps or falls are likely to result in injuries to yourself and others.
	Don’t drink or eat while playing the game.

System operation

The game system is designed to start working immediately after being turned on and can be turned off anytime. Please take care to have at least a minute between turn on/off/on state changes.

Turn on procedure

Apply power to the main power line. This depends on your installation type, it can be a fuse box, or a main power switch.

Turn off procedure

Remove the unit from power, via a switch or a fuse box / main power.

Maintenance

• The device is easily damaged if you put excessive pressure components.
• If not in use for a long period of time please disconnect the device from power.
• Disconnect the device when cleaning with a slight damp cloth. The buttons may be cleaned with slightly damp cloth, but do not use any organic solvents to clean the device.

Visi Kiddy Sound

Visi Kiddy Sound is a simple game that will keep toddlers busy and parents happy.

About the Game

Make the most of every wall in your amusement park and offer additional attractive animation for the youngest audience. They are often forgotten when planning and designing a trampoline park. Considering that they are not mature enough for most of the digital games and jumping elements in the trampoline park, it is necessary to prepare and offer them suitable content. Visi Kiddy Sound will be great fun in your trampoline park for the little ones. It's educational, colorful, loud, and interactive, all the things toddlers love.

How the game works?

The Visi Kiddy Sound game starts with a simple tap on one of the 12 buttons arranged on the wall. At that time, various sounds begin to play and guide the child through the game. The lights on the buttons lead the child and challenge them to go thru all 12 of them. Each button emits a different age-appropriate sound and educates them about animals and well-known children's songs.

Troubleshooting

The system doesn’t power on:

• Check the power connection to the Computing Mini and the speaker