Important Safety Instructions

CAUTION! OPENING THE DEVICE MIGHT RESULT IN ELECTRICAL SHOCK

	Visually check the product for any signs of damage, component failure and/or missing parts.		Do not distract others while they are installing the product.
	Any changes or modifications to the devices hardware or software will void the warranty of the device and may cause the device not to work properly.		The trampoline and its surroundings must always comply with local standards for trampolines.   If the instructions contradict the local regulations please disregard them.
	Keep the device away from any contact with water. Warranty void after water damage.		For indoor use only.
	Keep the device away from fire. Warranty void after fire damage.		Installation should be performed by authorized personnel.
	Be sure to take all anti-static precautions.		Optimum operating temperature is from 5°C to 30°C. Avoid extreme fluctuations of temperature.
	Wear appropriate clothing: Do not wear loose clothing or jewellery.		These instructions apply to the device itself. Please read the manual before operation.
	Long hair should be tied back.		Tidy back any loose cables that could become a tripping hazard.
	Immediately inform Visior games for maintenance advice if you have concerns.		Always use designated buttons on the designated system. and/or missing parts.

What’s in the box?

 

Full setup

 

 

First time setup

A typical installation should take 2 people around 90 minutes.

 

Installation checklist

CHECK 1
Pre-power up checkups
• Mounted screen onto construction designed for the game
• Make sure that all cables are connected:
HDMI cable from the computing device to screen
Ethernet cable with internet connection to ethernet socket
screen power cable to electricity
power adapter from Computing Mini to electricity
All fixings are tight and secure.
• No signs of damage, component failure and/or missing parts.
• No trapped and/or pinched cables.
• No loose cables that could become a tripping hazard
• Make sure there is no strain on the cables and the connectors.
• All electrical components are away from contact with water and heat sources.
CHECK 2
Power up
• Monitor and computing device must power on by itself when connected to power.
• It usually takes around 1 min for the system to boot up. You will be presented with the main
screen graphics when done.
CHECK 3
Ready for use
• The score is displayed on the screen

 

Powering on for the first time

In play safety guidelines

System operation

The game system is designed to start working immediately after being turned on and can be turned off anytime. Please take care to have at least a minute between turn on/off/on state changes.

Turn on procedure

Apply power to the main power line.

This depends on your installation type, it can be a fuse box, or a main power switch.

Turn off procedure

Remove the unit from power, via a switch or a fuse box / main power.

 

Maintenance

• Use a microfibre cloth to clean any dust that may be on the screen.

 

Game objective

 

We recommend

 

• Use only the ball that is provided with this product. Additional balls can be bought here: Link do (naše) trgovine
• Make sure players stay hydrated (drinking before and after the game is recommended).
• Make sure to rest when you feel like you need it.

 

Troubleshooting

The system doesn’t power on:

• Check the power connection to the Computing Mini.
• Check the display power connection.

 

The highscore screen doesn’t appear:

• Check the display power cable.

• Check if the system is turned on.

• Check the HDMI connection from the PC to the display.

• If everything seems in order but no picture is displayed please contact us at: support@visiorgames.com.